2014.02.05
Ebara Corporation launched two new models of air-cooled dry vacuum pumps that can be used in various evacuation applications for analytical instruments, medical equipment, as well as in the food industry, coating industry, and in manufacturing facilities. The EV-SA20 and PDV50 were launched in January, 2014.
The new air-cooled dry vacuum pumps were developed using the unique dry vacuum pump technology accumulated by Ebara through its experience in leading-edge industries such as the semiconductor industry. With the addition of these two new models, Ebara has expanded its product line of air-cooled dry vacuum pumps to offer speeds of 50 to 1,670 L/min, allowing customers to apply Ebara pumps to a wider range of uses. The EV-SA20 achieves a maximum pumping speed of 1,670 L/min, the largest in the product line, while the PDV50 meets market needs for a small-sized, lightweight solution.
Only a power supply is required to operate these pumps and because they can be easily moved and have flexible installation, that can be used for a wide variety of applications※1. Moreover, the products are CE mark and NRTL compliant, allowing them to be used overseas as well.
Ebara Corporation will continue to further dedicate itself to developing products and services that contribute to the improvement of customer productivity and cost reduction.
1 | Name | Air-cooled dry vacuum pump, model EV-SA20 |
Pumping speed | 1,670 L/min | |
Ultimate pressure | 3 Pa without gas ballast (5 Pa with gas ballast) |
2 | Name | Air-cooled dry vacuum pump, model PDV50 |
Pumping speed | 50 L/min without gas ballast (36 L/min with gas ballast) | |
Ultimate pressure | 20 Pa without gas ballast (200 Pa with gas ballast) |
Model | Pumping speed |
Ultimate pressure ※2
|
Dimensions(WxLxH mm)※3 |
---|---|---|---|
PDV50New | 50L/min | 20Pa | 184 x 300 x 253 |
PDV250 | 230L/min | 0.5Pa | 168 x 442 x 253 |
PDV500 | 500L/min | 0.5Pa | 185 x 467 x 285 |
EV-A10 | 1,000L/min | 1Pa | 317 x 544 x 344 |
EV-SA20 New | 1,670L/min | 3Pa | 324 x 584 x 347 |
*1
Pumps are not suitable for uses where corrosive or explosive gases are emitted or where reactive byproducts are generated. A gas ballast is required to discharge gas containing condensable gas or moisture.
*2
Ultimate pressures in the table above are values when the gas ballast is not used.
*3
Note:
"Model XXX" is our model code.